SP950 is a syringe pump for medical use, and it adopts microcomputer system and microelectronic technology, features in high-intelligence and high-safety. LCD can display each parameter in real-time, with multi-function alarm, and alarm with visual, auditory and character prompt. It takes the advantages of easy operation, steady work, high accuracy and checking the syringe specification automatically. Now, it has been widely used in various intravenous injections in clinical care of pets.
Features 1) Infusion rate and total volume can be set by user. 2) Alarms for infusion pipe occlusion, syringe fall-off, communication abnormal, low battery. 3) Bright, alarm volume and range of pressure alarm are adjustable. 4) Quick feed function, convenient for supplying medicine quickly and instantaneously. 5) Enter KVO mode after infusion completed. 6) The system will give prompt signal when there is no operation at power-on state. 7) Built-in rechargeable battery provides such functions as auto-switch power supply and auto-charge. 8) Display parameters with large screen, and give prompt information with visual, auditory and character signal, which is convenient for medical persons to operate. 9) The device can equipped with disposable syringe (CNS), and accuracy can be ensured by adjusting parameters.
Performance 1) Specification requirement for syringe: 10ml/20ml/30ml/50ml (CNS) 2) Infusion rate: 10ml 0.1ml/h-100ml/h 20ml 0.1ml/h-200ml/h 30ml 0.1ml/h-300ml/h 50ml 0.1ml/h-500ml/h 3) Rate of quick feed: 10ml 100ml/h 20ml 200ml/h 30ml 300ml/h 50ml 500ml/h 4) Accumulated volume display: 0ml-999.9ml 5) Accuracy: ±3% 6) Pressure range for occlusion alarm: Three grades are adjustable: Low: 40KPa ± 16KPa Middle: 70KPa ± 30KPa High: 100KPa± 35KPa 7) KVO rate: 0.1ml/h~5ml/h, adjustable 8) Safety classification: Class Ⅱ equipment, internally powered type BF 9) Alarm function: ①At non-operated state ②Near empty ③Empty, enter KVO mode ④Syringe fall-off ⑤Occlusion ⑥Pressure failure ⑦Motor failure ⑧Low battery ⑨Communication abnormal 10) Maximal power consumption: 20VA~30VA, the device can continuously work for at least two hours with the injection rate of 5ml/h or 500ml/h after fully charged. 11) Power supply: AC100~240V 50/60Hz 12) Battery: rechargeable lithium battery, 7.4V, 3500mAh 13) Working environment: Temperature: +5~40℃; Atmospheric pressure: 860hPa~1060h; Relative humidity: 20%~90%; no strong vibration and no corrosive gas. 14) Storage environment: Temperature: -20℃~+55℃; Relative humidity: ≤90%, no condensation; No corrosive gas and well-ventilated
Accessories A bracket A power cord A user manual Two fuses
Please note that if you need to use it for sphygmomanometer such as CONTEC08A, CONTEC08C, CONTEC08E, etc., please do not choose this cuff. Its tube length is only 0.2 meters,...
Please note that if you need to use it for sphygmomanometer such as CONTEC08A, CONTEC08C, CONTEC08E, etc., please don't choose this cuff. Its tube length is only 0.2 meters, so...
Introduction PM50 is a multi-functional patient monitor that can monitor BP and SpO2 at the same time. Realizing long time monitoring of dynamic blood pressure, the device is widely applicable...
The sampling tube is disposable. Please do not reuse it. The service time of each tube is recommended to be less than half an hour. If it is more than...
IntroductionDynamic ECG Systems adopt 3-lead, which can continuously record ECG waveform for 24-hour and analyze ECG waveform by the PC software. It is applicable for use in medical institution and...
Instructions It can be usd for CONTEC CMS6000/CMS6500/CMS6800/CMS7000/CMS8000 /CMS9200 Patient Monitor Content ◆ This is only one adult/child/neonatal SpO2 probe Important!!! The side interface represents the version of the device.So...
