Principle of the CMS70A Pulse Oximeter is as follows: Photoelectric Oxyhemoglobin Inspection Technology is adopted in accordance with Capacity Pulse Scanning & Recording Technology,the Pulse Oximeter can be used in measuring the pulse oxygen saturation and pulse rate through finger.The product is suitable for being used in family, hospital, oxygen bar, community healthcare, physical care in sports (It can be used before or after doing sports, and it is not recommended to use the device during the process of having sport) and etc.
Major Features
Operation of the product is simple ,low power consumption
SpO2 value display
Pulse rate value display, bar graph display
PI display
Pulse waveform display
Menu operation
Screen brightness can be changed
The display mode can be changed
Pulse rate sound indication, it can be turned on or turned off
With measured data overruns limits and low-voltage alarm function,the upper/down alarm range can be adjustable
Battery capacity indication
Low-voltage indication: low-voltage indicator appears before working abnormally which is due to low-voltage, and with alarm function
Connected with an external oximeter probe
Data storage function,and the storage data can be uploaded to computer
Real-time data can be transmitted to computers
Main performance
Display Mode: TFT Screen and LED display
Screen Resolution: 320*240
SpO2 Measuring Range: 0%~100%(the resolution is 1%)
Accuracy: 70%~100%: ±2%, Below 70% unspecified.
PR Measuring Range: 30bpm~250bpm(the resolution is 1bpm)
Accuracy: ±2bpm or ±2% (select larger)
Measurement Performance in Weak Filling Condition:SpO2 and pulse rate can be shown correctly when pulse-filling ratio is 0.4%. SpO2 error is ±4%, pulse rate error is ±2 bpm or ±2% (select larger).
Resistance to surrounding light: The deviation between the value measured in the condition of man-made light or indoor natural light and that of darkroom is less than ±1%.
Power Consumption: About 350mA
Voltage:AC 100~240V, 50/60HZ
Power Supply: Built-in recharge Li-Polymer
Battery working hour: after the device built-in battry finished the charge,it's continuous working time is not less than 1 hour
Safety Type:II device, BF Type
Accessories
A user manual
A power wire
A data line
An oximeter probe
User Manual （GB only）on request for other Language
The oximeter is a device for measuring blood oxygen saturation. Insisting on using oximeter and monitoring blood oxygen content can effectively prevent the occurrence of danger. In case of hypoxia,...
1.Instructions (No battery） CMS50M Pulse Oximeter is a portable equipment adopting advanced technology, it mainly checks SpO2 and PR value through the finger, which provides advanced, non-invasive and scientific means...
Attention!The USB data cable in the suite is only used to transmit data to PC software, and cannot be used for power supply. Its voltage is not enough to keep...
CMS50D-BT is available in wired version and B&T version. This linked product is wired version(without B&T) CMS50D-BT Pulse Oximeter is a portable equipment adopting advanced technology, it mainly checks SpO2 and...
Attention!The USB data cable in the suite is only used to transmit data to PC software, and cannot be used for power supply. Its voltage is not enough to keep...
To US address, shipping from USA Warehouse To other countries, shipping from China IntroductionDynamic ECG Systems adopt 3-lead, which can continuously record ECG waveform for 24-hour and analyze ECG waveform by...
Software download link: www.dlsoftw.com Index code:05RK1069 Introduction ABPM50 is a handhold ambulatory blood pressure monitor, which is designed according to oscillography theory. The device could monitor human body blood pressure...
Instructions Principle of the CMS60D Pulse Oximeter is as follows: Photoelectric Oxyhemoglobin Inspection Technology is adopted in accordance with Capacity Pulse Scanning & Recording Technology,the Pulse Oximeter can be used...
